CAN-CR200$511.50 (Inc. GST + economic freight)
Modular ISO 11898-2 CAN repeater
with backbone bus
The CAN-CR200 is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. Several CAN-CR200 can be connected to a CAN-hub via the integrated backbone bus. One special feature of the Repeater is the automatic recognition and separation of a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.
The galvanic isolation isolates the CAN segments from each other as well as from the power supply.
CAN-CR210/FO$453.20 (Inc. GST + economic freight)
CAN-CR210/FO Glass Fiber Version with ST Connector [Extended Temp. Range]
Stackable converter from
ISO 11898-2 to fiber optic cable
The CAN-CR210/FO is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. This provides a complete isolation and protection against EM-influences.
For creating star or tree topologies, several CAN-CR210/FO can be connected to a CAN-hub via the integrated backbone bus (also in conjunction with CAN-CR200).
One special feature of the repeater is, that it separates a defective segment from the rest of the network, so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.
CAN-IB100/PCIe$594.43 (Inc. GST + economic freight)
CAN-IB100/PCIe, 1 x CAN Interface High-Speed, Galvanic Isolation
Passive CAN Interface for PCI Express
With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. Other configurations will be available on consultation based on actual requirements, such as number of CAN interfaces and low speed/high speed CAN.
CAN-IB200/PCIe$1,152.00 (Inc. GST + economic freight)
Active CAN Interface for PCI Express
1 x CAN (High-Speed), Galvanic Isolation
With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as CAN (ISO 11898-2), and is available with a standard or a low-profile slot bracket.
Other configurations will be available on consultation based on actual requirements, such as number of CAN interfaces.
CAN-IB400/PCI$1,140.48 (Inc. GST + economic freight)
Active CAN Interface for PCI
1 x CAN (High-Speed)
With the CAN-IB400/PCI HMS offers an PCI interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as CAN (ISO 11898-2).
Features and benefits
- Active PCI board with 32 bit microcontroller
- Easy expandable via field bus expansion and expansion board
- One CAN channel (High-Speed)
- Galvanic isolation of the CAN interface
- Uniform driver packages support all IXXAT CAN and CAN-FD interfaces and allow easy change of the PC interface type
- Powerful programming interface for Windows “VCI” as well as “ECI” for Linux, QNX, RTX, INtime and VxWorks
CAN@net II/Generic$928.40 (Inc. GST + economic freight)
CAN-Ethernet gateway and CAN-Ethernet-CAN bridge
The CAN@net II/Generic enables easy and flexible access to
CAN systems via Ethernet. The device provides two operation
modes, a bridge mode and a gateway mode.
Features and Benefits
- Bridging of large distances and easy system access using Ethernet
- Filter and conversion functionality
- Cost savings due to simple wiring
CAN@net II/VCI$928.40 (Inc. GST + economic freight)
Active Ethernet interface
1 x CAN (High-Speed)
The CAN@net II allows simple, flexible access from a PC to CAN systems via Ethernet. Due to its ability to support the TCP/IP protocol, the CAN@net II allows the worldwide direct connection to a PC, implementation in an LAN, or, communication with the gateway via the Internet.
Features and benefits
- Easy CAN access over large distances
- Common driver interface for easy exchange of the PC interface type
- Also abailable as gateway/bridge device
CANblue II$772.00 (Inc. GST + economic freight)
Features and benefits
- Quick start-up and connection
- High transmission range
- Low latency transmission and high data throughput
- Flexible configuration options (combination of several CANblue II)
How it works
The bridge mode allows the user to set-up a CAN-Bluetooth-CAN bridge by using two CANblue II devices. Message exchange occurs on layer 2 and is transparent. The device can also be used in systems with CANopen, DeviceNet or customer-specific protocols. CAN-ID filters can be set for data exchange via Bluetooth. Using more than 2 CANblue devices, multiple busses can be linked with each other.
ASCII/Binary protocol mode
In this mode, functions for transmitting and receiving CAN messages and for configuring the CANblue II are available to the user based on simple ASCII commands and optimized CAN binary messages. The CANblue II is ideal for “non-Windows” systems or embedded platforms.
PC operation mode with VCI driver support
Because it is supported by the VCI CAN driver, the CANblue II can be operated with all IXXAT tools and with customer-specified programs. In addition, wireless access to CAN systems via Bluetooth can also be easily achieved with existing VCI-based application programs and tools.
CANbridge NT 200 – 2 Channel$665.00 (Inc. GST + economic freight)
Configurable CAN-to-CAN Bridge with 2 x High Speed CAN interfaces.
CANbridge NT 200 comes with 2 classic CAN channels .
Enclosure suitable for DIN Rail mounting.
This product may take upto 2 to 3 weeks for delivery.
iPC-I 165/ISA$1,320.00 (Inc. GST + economic freight)
iPC-I 165, 2 x SJA1000 CAN controller, 2 x CAN interface, 2 x galvanic decoupled
This is a powerful and economic solution covering a wide range of CAN applications requiring an active CAN board with one or two CAN channels. Some of the features offered by the on-board microcontroller include filtering, preprocessing, transmission and time stamped storage of the CAN messages. Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. In combination with the CAN driver (VCI, part of delivery), the iPCI 165 allows an easy integration of PC supported CAN applications. In addition, the iPC-I 165 is well-suited for use both with the IXXAT analysis and configuration tools and as a CANopen network controller.
iPC-I 320/PCI II$1,320.00 (Inc. GST + economic freight)
iPC-I 320/104; one CAN channel with galvanic isolation
This active CAN board with one por two CAN channels is appropriate for use in a wide variety of CAN applications. Filtering, pre-processing, transmission and time stamped storage of the CAN messages are just some of the features offered by the on-board micro-controller. In combination with the universal CAN driver (VCI), the iPC-I 320/PCI II allows an easy integration of PC supported CAN applications. Offering an exceptional combination of functionality and value, it is perfectly suited for high-volume productions. In addition, the iPC-I 320/PCI II is also well-suited for use with the IXXAT analysis and configuration tools.