Gateways & Connectivity Products
-
4 port Modbus TCP to RTU/ASCII Gateway
$990.00 (Inc. GST + economic freight)Add to cartFeatures - Wide input range DC power supply.
- Provide 3KV optical isolation protection.
- Supports Ethernet Mode like TCP Server, TCP Client, and UDP.
- Support Auto-MDIX twisted pair crossover detection and auto-correction.
- Maximum allowed bandwidth is 460 Kbps per Serial Port.
- Supports PPPoE , DDNS , NTP , FTP , Telnet.
- Runs in Stand Alone Mode.
- Built in Restore Factory default push button.
- Auto direction RS485 flow control by hardware.
- Power/Link and 4 pairs serial RX/TX mode LED indicator.
- Support screw terminal and standard external DC power adaptor.
- Panel mounts and Din-Rail Support.
Specifications - CPU:32 bit 580MHZ with MMU.
- Power Input Voltage: DC +9V to +24V.
- LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.
- RS-232: TX, RX, GND.
- RS-422: TX+, TX-, RX+, RX-.
- RS-485: Data +, Data –.
- Data Rate: 75~230.4Kbps.
- Parity: none, even, odd.
- Data Bits: 5, 6, 7 or 8.
- Stop Bits: 1, 2.
- Configuration through Windows Admin Utility / Web Console / Telnet Console.
- Protocol: ARP , IP , ICMP , UDP , TCP , HTTP , DHCP,PPPoE , DDNS , NTP , FTP , Telnet.
- Power supply: Screw terminal, or standard external DC adapter.
- Serial interface: +/-15 KV ESD.
- RS422/485 interface: Surge, over current, over voltage protection.
- Serial terminal and Ethernet with 3KV Optical Isolation.
- Power consumption: 12V/400 mA .
- Operating Temperature: -20 °C to 65 °C.
- Humidity: 0~90% Non-Condensing.
- Dimensions: 224(L)*107(W)*33(H) /mm.
- Weight: 400g (W/Packing).
-
4 port RS232/422/485 Serial Device Server
$724.68 (Inc. GST + economic freight)Add to cartFeatures - Wide input range DC power supply.
- Supports Socket operation modes like TCP Server, TCP Client, and UDP using TCP/IP and UDP protocols.
- Support Auto-MDIX twisted pair crossover detection and auto-correction.
- Each Port maximum connection 4 host PC at TCP Server and TCP Client Mode.
- Maximum allowed bandwidth is 230.4 Kbps per Serial Port.
- Supports Web Console, Telnet Console.
- Runs in Stand Alone Mode.
- Built in Restore Factory default push button.
- Features Accessible Imps List to add or remove “legal” remote host IP Addresses to prevent unauthorized access to Serial Server.
- Features Auto IP Address Report to periodically report the IP Address of Serial Server to the assigned Host on Network.
- Auto direction RS485 flow control by hardware.
- Surge protection and over current and over voltage on RS-422/485 data lines.
- Virtual COM drivers for WIN 32bit XP /Vista/2003Server/2008 Server (32-bit & 64-bit), 2000 Server OS, Win 7 (32-bit & 64-bit) ,Win 8/8.1 (32-bit & 64-bit).
- Fully compatible with Ethernet and TCP/IP protocol.
- Supports 10/100 Mbps Ethernet.
- Power/Link and 4 pair Serial RX/TX mode LED indicator.
- Support screw terminal and standard external DC power adaptor.
- Panel mounts and Din-Rail support.
Specifications - CPU:32 bit 580MHZ with MMU.
- Power Input Voltage: DC +9V to +24V.
- LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.
- RS-232: TX, RX, GND.
- RS-422: TX+, TX-, RX+, RX-.
- RS-485: Data +, Data –.
- Data Rate: 75~230.4Kbps.
- Parity: none, even, odd.
- Data Bits: 5, 6, 7 or 8.
- Stop Bits: 1, 2.
- Configuration through Windows Admin Utility / Web Console / Telnet Console.
- Protocol: ARP , IP , ICMP , UDP , TCP , HTTP , DHCP,PPPoE , DDNS , NTP , FTP , Telnet.
- Power supply: Screw terminal, or standard external DC adapter.
- Serial interface: +/-15 KV ESD.
- RS422/485 interface: Surge, over current, over voltage protection.
- Serial terminal and Ethernet with 3KV Optical Isolation.
- Power consumption: 12V/400 mA .
- Operating Temperature: -20 °C to 65 °C.
- Humidity: 0~90% Non-Condensing.
- Dimensions: 224(L)*107(W)*33(H) /mm.
- Weight: 400g (W/Packing).
-
Anybus Communicator CAN Modbus RTU
$1,074.00 (Inc. GST + economic freight)Add to cartThe chosen interfaces within this Anybus gateway are:
- CAN-based
- Modbus RTU Slave
Integrate your CAN-based industrial devices and equipment to a Modbus RTU control system without the need for any changes to the device. Just connect, configure and you’re done
-
Bluetooth to RS232/422/485 Converter
$475.20 (Inc. GST + economic freight)Add to cartFeatures - Bluetooth V1.2 Class 1 compliance. (2.5mW/4dBm)
- Transmission range open filed over to 100M.
- Auto reconnect when the external power lost.
- Auto clear serial buffer when the data continuity input when re-boot.
- Auto directionally RS485 signal communication.
- Option to 1KM when replace the direction antenna.
- Support all common baud rate from 1.2K to 256Kbps.
- Friendly interface TRP-BT configuration windows utility
- RS422 and RS485 signal auto switching.
- LED indicators for Power/Link/TX/RX.
- Surge protection on RS422/RS485.
- Power supply: Screw terminal, or external DC adapter.
- Wide input range power supply.
- DIN rail and panel mount support.
Specifications - Power requirement: DC voltage input from +10V to +30V.
- RS232 signal: TXD, RXD, GND, RTS, CTS.
- RS422/485 connection: industrial plug-in screw terminal.
- RS485 signal: differential 2 half-duplex wires. (D+, D-)
- RS422 signal: differential 4 full-duplex wires.(TX+, TX-, RX+, RX-)
- Baud rate: 1.2Kbps to 256Kbps.
- Data bit: 8
- Support Parity check: None, Even, Odd.
- Stop bit: 1, 2.
- RS232 flow control RTS/CTS: Enable, Disable.
- Host PC com port to TRP-C51 connection: use null modem female-female cable.
- Plug-in screw terminal wiring: Accepts AWG #12 ~30 wires.
- Wireless transmission distance: Open filed: 100M.
- Antenna cable length:1530mm.
- RS422/485 distance: up to 4000ft. (1200M)
- LED indicator: Power, Link, TX, and RX.
- Power input type: Screw terminal or DC plug.(5.5*2.1*12mm/500mA)
- Power consumption: 1.2 watt.
- Operating temperature: -10 to 50℃.
- Storage temperature: -20 to 65℃.
- Humidity: 10-90% Non-condensing.
- Dimension: 151mm X 75mm X 26mm.
- Weight: 400g.
-
CAN@net NT 200 – CAN Ethernet Gateway
$963.60 (Inc. GST + economic freight)Add to cartIXXAT CAN@net NT 200 is a CAN-Ethernet gateway, bridge and PC interface
CAN@net NT 200 comes with 2 classic CAN channels
It offers three operation modes and can be used as a PC interface as bridge and gateway. .
Ex stock, if sold out 3 weeks from order.
(This product replaces CAN@NetII Generic which is being phased out)
-
CAN@net NT 420 – CAN Ethernet Gateway
$1,438.80 (Inc. GST + economic freight)Add to cartIXXAT CAN@net NT 420 is a CAN-Ethernet gateway, bridge and PC interface with Up to 4 x CAN of which 2 x CAN FD
CAN@net NT 420 offer three operation modes and can be used as a PC interface as bridge and gateway.
This product may take upto 2 to 3 weeks for delivery.
-
CANblue II
$772.00 (Inc. GST + economic freight)Add to cartFeatures and benefits
- Quick start-up and connection
- High transmission range
- Low latency transmission and high data throughput
- Flexible configuration options (combination of several CANblue II)
How it works
Bridge mode
The bridge mode allows the user to set-up a CAN-Bluetooth-CAN bridge by using two CANblue II devices. Message exchange occurs on layer 2 and is transparent. The device can also be used in systems with CANopen, DeviceNet or customer-specific protocols. CAN-ID filters can be set for data exchange via Bluetooth. Using more than 2 CANblue devices, multiple busses can be linked with each other.ASCII/Binary protocol mode
In this mode, functions for transmitting and receiving CAN messages and for configuring the CANblue II are available to the user based on simple ASCII commands and optimized CAN binary messages. The CANblue II is ideal for “non-Windows” systems or embedded platforms.PC operation mode with VCI driver support
Because it is supported by the VCI CAN driver, the CANblue II can be operated with all IXXAT tools and with customer-specified programs. In addition, wireless access to CAN systems via Bluetooth can also be easily achieved with existing VCI-based application programs and tools.
-
CANbridge NT 420 – 4 CAN (2 CAN FD)
$1,278.00 (Inc. GST + economic freight)Add to cartConfigurable CAN-to-CAN Bridge/Router with CAN FD Support
CANbridge NT 420 comes with 4 classic CAN channels of which 2 can be configured as CAN FD channels .
Enclosure suitable for DIN Rail mounting.
This product may take upto 2 to 3 weeks for delivery.
-
CANio500
$987.04 (Inc. GST + economic freight)Add to cartThe CANio 500 enables the easy and quick connection of various analog and digital input and output signals to CAN or CANopen systems – whether in experimental setups, component test stands or vehicles. CANio 500 is a field attachable CAN/ CANOpen I/O device available in multiple configurations as below:
- Suitable for CANopen and CAN layer 2 networks
- 4 digital inputs + clamp 15 (between 0 … 34 V, threshold at 50 %)
- 4 digital outputs, max. 1 A, output voltage free selectable
- 4 analog inputs, 12 bit res. (0 – +10V)
- 4 analog outputs, 12 bit res. (+/- 5 V, or +/- 10 V, or 0-5 V, or 0-10 V, switchable via software)
- Universal use due to robust design and wide power supply range
- Easy configuration and versatile configuration options
- Adaptation to specific requirements via CANio ADK
- Plug-in version available for direct integration into customer hardware
-
Dual port RS232 to RS422/485 Optical Isolated Converter
$277.20 (Inc. GST + economic freight)Add to cartFeatures - Wide range input DC power supply.
- Automatic data format configuration.
- Auto direction flow control on RS-485.
- Auto baud rate switching from 300bps to 115.2Kbps.
- 3000V DC isolated protection.
- Surge protection on RS-422/485 data lines.
- Power/TX/RX mode LED indicator.
- Support screw terminal and external DC adaptor.
- DIN rail or panel mounts support.
Specifications - Power input voltage: DC +10V to +30V.
- Host connection: 2 standard D-Sub 9 pin female connectors.
- RS-232 interface: Standard D-Sub 9 pin female connector.
- RS-232 signal: TXD, RXD, GND.
- RS-422/485 interface: Industrial plug-in screw terminal.
- RS-485 signal: Differential 2 half-duplex wires (D+, D-).
- RS-422 signal: Differential 4 full-duplex wires. (TX+, RX+, TX-, RX-) .
- Communication speed: Form 300bps to 115.2Kbps auto detecting.
- RS422/485 line protection: Against surge, short circuit, voltage peak.
- Distance: Up to 4000ft (1200M).
- Isolation voltage: 3000V DC.
- Plug-in screw terminal wiring: Accepts AWG #12 ~ 30 wires.
- Signal LED: Power on, TXA, RXA, TXB, RXB.
- Power supply: Screw terminal, or external DC adapter.
- Power consumption: 1.3W.
- Operating environment:-10 to 50℃ .
- Storage temperature: -20 to 70℃ .
- Humidity: 10-90% Non-condensing.
- Dimension: 151mm X 75mm X 26mm .
- Weight: 375g .
-
Ethernet to Fiber Media Converter, SC/20KM
$324.72 (Inc. GST + economic freight)Add to cartFeatures - Wide input range DC power supply.
- Plug-and-Play design for the installation within seconds.
- Compact and Rugged Metal case capable of withstanding harsh environment.
- Data rate: 10/100Mbps auto-negotiation and half-/Full-duplex mode on TX port.
- Auto MDI-X/MDI-II for 10/100Base-TX port.
- Provides media conversion from UTP to Fiber Optic media types
- Supports link fault pass through function.
- Supports far end fault function.
- LED display to indicate the whole working status.
- 3 power input types: Direct USB power, external DC adapter and screw terminal.
- Support IEEE Standard: 802.3u 100BaseTX & 100BaseFX.
Specifications - Cable: Fiber cable (9/125um).
- One 10/100Base-TX auto-negotiation Ethernet RJ-45 port.
- One 100Mbps fiber port with Single-mode SC connector.
- Built in 128Kb RAM for data buffer.
- Wavelength: 1310 nM.
- Fiber Power:-15 ~ -8 dBm.
- LED indicator: Power and power and TX and fiber link/activity, full/half, 10/100MB.
- Distance : 20KM can be up to 60KM (option).
- Speed : Auto 10/100MB.
- Power Consumption: 12V/160mA.
- Power requirement: USB port power or DC input or screw terminal from +10 to 30V.
- Operating temperature: -10 to 50℃.
- Storage temperature : -20 to 70℃.
- Humidity: 10-90% Non-condensing.
- Dimension: 151mm X 75mm X 26mm .
- Weight: 400g .
-
Fiber to RS232/422/485 Isolated Converter, SC/40KM
$475.20 (Inc. GST + economic freight)Add to cartFeature - Wide input range DC power supply.
- SC single mode fiber port.
- Auto direction flow control on RS-485.
- Auto RS-232/422/485 signals switching.
- Auto data format detecting.
- Auto baud rate switching from 300bps to 115.2Kbps.
- Support 3000V DC isolation protection.
- Support surge protection on RS-422/485 data lines.
- Power/TX/RX mode LED indicator.
- Fiber transmission distance up to 40KM .
- DIN rail or panel mount support.
Specifications - Power Input Voltage: DC +10V to +30V.
- Interface: RS-232/422/485 auto switching.
- RS-232: 3 full-duplex (TXD, RXD, GND).
- RS-422: Differential 4 full-duplex wires(TX+,TX-,RX+,RX-).
- RS-485: Differential 2 half-duplex wires(Data+,Data-).
- Cable: Fiber cable (9/125um).
- Wavelength: 1310(FPLD) nM.
- Distance: Fiber up to 40KM and RS-422/485 up to 4000ft (1200M ).
- RS-422/485 line protection: Against surge, short circuit, voltage peak.
- Connection type: Screw terminal for maximum AWG #12~30 wires.
- Power supply: Screw terminal, or external DC adapter.
- Power consumption: 110mA/12V
- Isolation Voltage: 3000V DC.
- Operating environment: -10 to 50℃ .
- Storage temperature: -20 to 70℃.
- Humidity: 10~90% Non-condensing.
- Dimension: 151mm X 75mm X 26mm .
- Weight: 388g .
